Cart

KS Tools Products

Showing 40 out of 6716 Products
Sort By:  

KS Tools 3x40mm Insulated Protective Sleeve without Clamp Cap, 117.1785
  • Insulated Handle to IEC 60900

  • Made Out of Tough Elastic Insulating Material

KS Tools Bronze Plus 2.9/16 inch 75mm Aluminium 6 Point Socket, 963.1033
  • Non-sparking, Explosion Proof, Corrosion Resistant & Wear Resistant

  • Non Ferrous Alloy

KS Tools Bronze Plus 12x205mm Aluminium 6 Point Long Hexagon Key Wrench with T-Handle, 963.1586
  • Non Ferrous Alloy

  • Non-sparking, Explosion Proof, Corrosion Resistant & Wear Resistant

KS Tools Bronze Plus 220x100mm Aluminium Scraper, 963.9536
  • Non-sparking, Explosion Proof, Corrosion Resistant & Wear Resistant

  • Non Ferrous Alloy

KS Tools 3/4 inch Insulated Torque Wrench with Reversible Ratchet Head, 516.5159
  • Use is Almost all Industrial Production Areas

  • Highest Precision & Reliability Even Under Tough Long-Term Use

KS Tools 1/2 inch 70-350 Nm Torque Wrench with Close Gap Release, 516.3540
  • Torque Sting is Easy by Pulling Out Adjusting & Pushing

  • Square Drive Adaptor to DIN 3120-ISO 1174 with Ball Lock

KS Tools 1/4 inch CrV Steel Insulated Torque Wrench with Reversible Ratchet Head, 117.1400
  • Precise Reading Accuracy for a Minimum 5000 Tightening Cycles

  • For Controlled Fastening in a Clockwise Direction

KS Tools 14mm Steel Phosphate Extra Long Ball Ended Hexagon Key Wrench, 151.3014
  • Extra Long Execution

  • Ball Head on the Long End & Continuous Hardened

KS Tools 5/16 inch Steel Matt Chrome Extra Long Ball Ended Hexagon Key Wrench, 151.3312
  • Ball Head on the Long End

  • Extra Long Execution & Continuous Hardened

KS Tools T27 CrV Socket Bit for TX Screws, 911.1448
  • Press Fitted Nickel Plated Insert Bit

KS Tools 9/16 inch CrV Chromeplus Deep Hexagonal Socket, 918.3828
  • Flank Traction Profile & Long Execution

KS Tools 5mm CrV Chromeplus Socket Bit for Slotted Screws, 918.3851
  • Press Fitted Nickel Plated Insert Bit

KS Tools 15mm CrV Chromeplus 12 Point Socket, 918.3723
  • Flank Traction Profile

KS Tools Bronze Plus 4.5mm Aluminium Double Open Ended Spanner, 963.7119
  • Both Jaws the Same Size, Extra Flat Heads, Non-sparking, Explosion

  • Non Ferrous Alloy

KS Tools Bronze Plus 1.1/16 inch Aluminium Slogging Ring Spanner, 963.7795
  • 12 Point Flank Traction Profile

  • Non Ferrous Alloy

KS Tools 1/4 inch CrV Steel Insulated Extension, 117.1454
  • With Frictional Contact Square Drive with Locking Device

  • Insulated Handle to LEC 60900

KS Tools Bronze Plus 21x23mm Aluminium Double Open Ended Spanner, 963.7035
  • Non Ferrous Alloy

  • Non-sparking, Explosion Proof, Corrosion Resistant & Wear Resistant

KS Tools 5-60m Nm Precision Torque Testing Instrument with Dial Indicator, 516.3325
  • Large Vision Panel for Precise Adjustment

  • Display Torque Testing Instrument with Drag Indicator

KS Tools 19mm M18x1.5x130mm Steel Spindle, 610.1902
KS Tools Bronze Plus 23mm Aluminium 90 deg Offset Pronged Wrench, 963.8473
  • Non Ferrous Alloy

  • Non-sparking, Explosion Proof, Corrosion Resistant & Wear Resistant

KS Tools Classic 16x18mm CrV Offset Open Double Ring Spanner, 517.0263
  • Flank Traction Profile

  • High Corrosion & Wear Protection

KS Tools Gear Plus 16x19-17x18mm CrV 4 in 1 Reversing Double Ratchet Ring Spanner, 503.4546
  • High Corrosion & Wear Protection

  • Flank Traction Profile

KS Tools 50mm Stainless Steel Slogging Ring Spanner, 964.0750
  • Extreme Resistance to Intergranular Corrosion & Oxidation

  • Autoclavable (Heating of the Tools to Over 100 deg C

KS Tools Gear Plus 30mm Duo CrV Combination Spanner with Ratchet Mechanism, 503.5928
  • Flank Traction Profile

  • High Corrosion & Wear Protection & with Fine Toothed Ratchet

KS Tools Gear Plus 11mm CrV Flexible Combination Ratcheting Spanner, 503.4711
  • High Quality Finish

  • Flank Traction Profile (12 Point)

KS Tools Classic 30mm CrV Extra Long Combination Spanner, 517.1530
  • High Corrosion & Wear Protection

  • Flank Traction Profile

KS Tools Classic 1.7/16 inch CrV Offset Single Ring Spanner, 517.9121
  • Flank Traction Profile & with Shaft for Snap-on Handle

  • Heavy Duty to Deliver Maximum Torque & with Locking Pin

KS Tools T20 Steel Long TX-Hexagon Key Wrench, 151.2303
  • Long Execution

  • Continuous Hardened

KS Tools 9/32 inch 12 Points Socket, 917.1477
By: Ks Tools
Available on Request
  • Flank Traction Profile & Long Execution

KS Tools Chrome Plus 9/16 inch Hexagonal Socket, 918.15205
  • Flank Traction Profile & Long Execution

KS Tools 11/32 inch 12 Points Socket, 917.1479
By: Ks Tools
Available on Request
  • Flank Traction Profile & Long Execution

KS Tools Chrome Plus 4mm Hexagonal Socket, 918.1404
  • Flank Traction Profile & Long Execution

KS Tools Chrome Plus 7/16 inch Chrome Plus Deep Hexagonal Socket, 918.1529
  • Flank Traction Profile & Long Execution

KS Tools Chrome Plus 7/32 inch Chrome Plus Deep Hexagonal Socket, 918.1523
  • Flank Traction Profile & Long Execution

KS Tools Chrome Plus 5.5mm Chrome Plus Deep Hexagonal Socket, 918.14255
  • Flank Traction Profile & Long Execution

KS Tools Chrome Plus 9/32 inch Hexagonal Socket, 918.1515
  • Flank Traction Profile & Long Execution

KS Tools 3/8 inch 12 Points Socket, 917.1480
By: Ks Tools
Available on Request
  • Flank Traction Profile & Long Execution

KS Tools Chrome Plus 1/4 inch Chrome Plus Deep Hexagonal Socket, 918.1524
  • Flank Traction Profile & Long Execution

KS Tools 10-150c Nm Precision Torque Testing Instrument with Dial Indicator, 516.3435
  • Tool Mounting Using a Three Jaw Chuck

  • Large Vision Panel for Precise Adjustment

KS Tools 2.5/16 inch CrV Slogging Open End Spanner, 517.2274
  • Impact Area

Buy KS Tools Products at Best Prices Online in UAE at Moglix.ae

Welcome to KS Tools products store in UAE. We have got all your needs covered with the latest KS Tools products available at the best price. We offer more than 6716 products by KS Tools listed on our online store.


Moglix.ae is your go-to online store for best deals and offers on KS Tools products.